AUM 017 is an automatic stainless steel washbasin for wall mounting. The sink is not equipped with the usual sensor tap, but is equipped with a durable stainless steel tap with built-in contactless control. This makes the sink significantly more resistant to damage. The optoelectronic sensor responds to the hands under the tap – when the hands are placed in the sensor zone, the water is automatically released by opening the solenoid valve, which remains on for some time after removal (deceleration time). The sink is equipped to prevent excessive hot water pressure. The lining is made of material. 1.5 mm.
The sink is also available separately without a tap – with a 33 mm tap opening. On request, it is delivered without a tap opening – for a wall tap. Delivery includes waste and small assembly material.
Stainless steel washbasin AUM 017 complies with EU standards. It is intended for food processing plants and in places where it is necessary to increase the level of hygiene with maximum water savings.
|AUM 017||large wall sink, no tap|
|AUM 017.1||large wall sink, one supply – 12V, 50Hz|
|AUM 017.1B||large wall sink, one supply – 6V (4×1,5)|
|AUM 017.2||large wall sink, warm and cold water – 12V, 50Hz|
|AUM 017.2B||large wall sink, warm and cold water – 6V (4×1,5)|
|AUM 017.E||large wall sink, with instantaneous water heater – 230 V|
|AUM 017.TV||large wall sink, with thermostat valve – 12V, 50Hz|
|AUM 017.TVB||large wall sink, with thermostat valve – 6V (4×1,5)|
A- cold water
B- warm water
C- el. voltage
D – drainage