Wall-mounted stainless steel washbasin – AUM 03

The wall-mounted stainless steel washbasin AUM 03 is automatically controlled by a sensor. The washbasin is equipped with a factory-installed faucet, sensor-controlled. The photocell flows automatically when you place your hands in the scan area (the solenoid valves open). They remain on for the set water flow time and after removing the hands from the scan area. This washbasin is equipped with an overpressure protection mechanism.

Versions:
AUM 03 – washbasin, no faucet
AUM 03.1 – one water connection, power supply 12V 50Hz
AUM 03.1B – one water connection, power supply 6V (4xAA)
AUM 03.2 – hot and cold water connection, power supply 12V 50Hz
AUM 03.2B – hot and cold water connection, power supply 6V (4xAA)
AUM 03.TV – with thermostatic valve, power supply 12V 50Hz
AUM 03.TVB – with thermostatic valve, power supply 6V (4xAA)

AUM 03 with its performance meets EU standards, and is mainly intended for use in the food industry where certain hygiene standards are set, with a requirement for max. water saving.

Basic technical data:

• sensor radius: 0-0.2 m
• water supply: 1/2 “
• water pressure: 0.1-1.0 MPa
• drain: d = 40 mm
• washbasin size: 520 x 320 x 100 mm
• el. protection: IP 55
• adjustable flow time: 0-4 sec (factory 1 sec)
• power supply: 12V, 50 Hz
• power required: 6 VA
• power source:
  ZAC 1/20 (max.3 x AUM 03)
  ZAC 1/50 (max.8 x AUM 03)
• weight: 9 kg

Delivery includes:

• wall-mounted stainless steel washbasin
• the head of the photocell
• electronics
• solenoid valve
• angle valve with filter (AUM 03.2,. TV – 2 pcs)
• mixer valve (AUM 03.2)
• thermostatic valve (AUM 03.TV)
• siphon
• connecting pipes
• small connecting material

A – cold water (AUM 03.2, .TV)
Mixed water (AUM 03.1)
Ul. pipe 1/2″
B – warm water (AUM 03.2, .TV)
Ul. pipe 1/2″
C – voltage
D – output
E – scanning zone

Installation conditions:

1. Set the water supply as shown
2. Adjust the drain d = 40 mm
3. Install the power cable – 12 V, 50 Hz from the safety power transformer ZAC