AUM 016 is an automatic stainless steel washbasin for wall mounting. The sink is not equipped with the usual sensor mixer, but with a durable stainless steel faucet with a built-in non-contact sensor. This makes the sink significantly more resistant to damage. The optoelectronic sensor responds when the hands are placed in the sensor zone, the water is automatically released by opening the solenoid valve, which remains on for a certain time after removal (deceleration time). The sink is equipped to prevent excessive hot water pressure. The lining is made of material. 1.5 mm.
The sink is also available separately without a tap – with a 33 mm tap opening. On request, it comes without a battery hole – for a wall-mounted battery. Delivery includes siphon and small mounting material.
Stainless steel washbasin AUM 016 complies with EU standards. It is intended for food processing processes, but also wherever necessary to increase hygiene standards with maximum water savings.
Washbasins are made of stainless steel AISI 304.
DELIVERY INCLUDES:
– washbasin, automatic tap (depending on type), connecting hoses, small connecting material, siphon, 4xAA batteries, instantaneous water heater (AUM 016.E)
VERSIONS:
| AUM 016 | wall sink, no tap |
| AUM 016.1 | wall sink, one supply – 12V, 50Hz |
| AUM 016.1B | wall sink, one supply – 6V (4×1,5) |
| AUM 016.2 | wall sink, warm and cold water – 12V, 50Hz |
| AUM 016.2B | wall sink, warm and cold water- 6V (4×1,5) |
| AUM 016.E | wall sink, with instantenous boiler – 230 V |
| AUM 016.TV | wall sink, with thermostat valve – 12V, 50Hz |
| AUM 016.TVB | wall sink, with thermostat valve – 6V (4×1,5) |
SCHEME:
A – cold water
B- warm water
C – el. voltage
D- drainage
