AUM 05 is an automatic stainless steel washbasin for wall mounting. The sink is equipped with a tap for non-contact control. The optoelectronic sensor responds to the hands below the spout – when the hands are placed in the sensing zone, the water is automatically released by opening the solenoid valve, which remains open for some time after removal (deceleration time). The sink is equipped to prevent excessive hot water pressure.
The washbasin is also available as a single housing without a tap, with a tap opening d = 33 mm. It can be delivered without a hole – for a wall-mounted battery. Delivery includes siphon and small mounting material.
Stainless steel washbasin AUM 05 meets the requirements of EU standards. It is intended for food processing plants, but also where it is necessary to increase hygiene standards with maximum water savings.
Washbasins are made of stainless steel AISI 304.
– sink, faucet, electronics, el. mag. valve (AUM 05.2 – 2 pcs), angle valves (AUm 05.2 and .TV -2 pcs), thermostatic valve (AUM 05.TV), flow boiler (AUM 05.E), power supply (AUM 05.E), siphon, connecting hoses, small mounting accessories
|AUM 05||wall sink, no tap|
|AUM 05.1||wall sink, one supply – 12V, 50Hz|
|AUM 05.1B||wall sink, one supply – 6V (4×1,5)|
|AUM 05.2||wall sink, warm and cold water – 12V, 50Hz|
|AUM 05.2B||wall sink, warma and cold water – 6V (4×1,5)|
|AUM 05.E||sink, instatenous boiler – 230V, 50Hz|
|AUM 05.TV||wall sink, with thermostat boiler – 12V, 50Hz|
|AUM 05.TVB||wall sink, with thermostat boiler – 6V (4×1,5)|
A – cold water
B – warm water
C – el. voltage
D – drainage
E – scanning zone