ATMOS automation ACD 03

The ATMOS ACD 03 automation is equipped with a touch screen, which controls not only the operation of the automatic ignition fuel, but also the operation of the entire heating system. It is installed in ATMOS Generator Dokogen boilers.

Automatic wood ignition is used for the planned ignition of the boiler, eg before arriving home in the afternoon or before arriving at the cottage. Ignition of fuel is very fast (approx. 5 minutes) and allows the boiler operator to come “warm”. Fuel ignition can be set and arranged for ACD 03 control according to time (weekly program), according to heating system requirements or according to tank temperature.

Between the upper and lower doors, a device for automatic wood ignition (chamber with a glowing spiral) is installed. Wood pellets are used for ignition, which fill the ignition chamber. The amount of pellets corresponds to the size of the blade that is part of the boiler delivery. The pellets ignite themselves at a certain point using an electric glow coil (500W)

ACD 03/04 control controls boiler functions:

• fan
• pumps
• boiler return water temperature
• two mixing heating circuits
• filling and emptying the storage tank
• DHW pump control

Advantages of ATMOS pyrolysis boilers
– Possibility of burning large pieces of wood
– Large firebox – long burning time
– Tubular heat exchanger
– High efficiency over 90% – pre-heats primary and secondary air to high temperature
– Ecological combustion – boiler class 5 – ČSN EN 303-5, ECODESIGN 2015/1189
– Exhaust fan – dust-free ash cleaning, smoke-free boiler room
– Cooling loop that protects against overheating – no danger of boiler damage
– The exhaust fan automatically shuts off when the fuel burns out – flue gas thermostat
– Easy ash removal – large space for ash (when burning wood you need to clean once a week)
– Small size and light weight
– High quality