Automatic mixer – AUM 1-II

447,94 562,74 

AUM 1 is a washbasin mixer automatically controlled by a sensor, with a temperature selector.

SKU: N/A Category: Tag:
Description

AUM 1 – automatic mixer for washbasin sensor-controlled, with temperature selector. Water flows automatically when the hands are placed in the scanning zone, by opening the solenoid valves. They remain on even when the hands are removed from the scan zone for the time set. The water stops flowing if the sensor is shaded for 30 sec.
The water temperature is easily adjusted to the individual requirements of each user, using a spiral ornament (mixing chamber) of the temperature selector.

AUM 1 is produced in two versions of power supply:
AUM 1 – washbasin mixer with 12 V supply from safety supply transformer ZAC.
AUM 1.B – washbasin mixer with 6 V supply from cylindrical faucets located under the washbasin ceramics. No external power source is required. Electronics guarantee that the solenoid valve will not open the water inlet without taps of sufficient capacity to ensure its closure. -AUM 1.E-for instantaneous or storage electric boilers
AUM 1 – mixer automatically controlled by the sensor meets EU standards.

Basic technical data:

  • Sensor radius: 0-0.3 m
  • water supply: 1/2 “
  • water pressure:
    0.1-0.8 MPa (AUM 1.B)
    0.1-1.0 MPa (AUM 1)
    0.3 MPa (AUM 1.E)
  • Wash hole diameter: min. 32 mm
  • Adjustable flow time: 1-4 seconds (factory setting 1 second)
  • Power supply:
    12 V, 50 Hz (AUM 1, 1E)
    6 V DC (AUM 1.B)
  • Power required: 10 VA (AUM 1), 6 VA (AUM 1.E)
  • power source:
    ZAC 1/20 (max.2Xaum1), (max.3Xaum 1.E)
    ZAC 1/50 (max. 5Xaum 1) (max. 8 x AUM 1.E)
  • batteries-1.5 V (AUM 1.B) -4 pcs
  • battery life: approx. 1.5 years / 100 rinses per day
  • weight: 2.5 kg

Delivery includes:

  • Combined faucet
  • Photocell head
  • Electronics with suspension bracket
  • Solenoid valve (AUM 1, 1.B-2pcs)
  • Angle valve with filter (AUM 1,1.B-2 pcs)
  • Mouse T-piece with nut (AUM 1.E)
  • Battery holder (AUM 1.B)
  • Cylindrical batteries 1.5 V (AUM 1.B) -4 pcs
  • Connecting pipes
  • Fastening strap
  • M8 screw with nut and washer
  • Putty tube

 

aum-1-1

Conditions for erection of the structure:

  • Adjust the water supply, 1/2 “pipe as in fig.
  • Adjust the drain-as for the siphon.
  • Install the electric cable-12 V, 50 Hz from the safety power transformer ZAC (not for AUM 1.B)
  • The ceramics of the sink are placed as in the picture.
Additional information
Weight 3 kg
Dimensions 18,5 × 12 × 18,5 m
Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.