System for flushing urinals – COS 2

The system for flushing urinals COS 2 is a time-controlled flushing system for 1 urinal or urinal trough.
It is possible to set the occasional rinse during the day, the interval between rinses or the duration of the rinse. The COS 01 flushing system can also use an external source, such as a bell during school holidays, as a driving signal. The system for flushing urinals can also be installed outside the bathroom, which prevents unauthorized use.

Basic technical data:

• input power supply: 230 V, 50 Hz
• power required: 6 VA
• output power supply: 12 V, 50 Hz
• box dimensions: 280 x 225 x 100 mm

Construction requirements:

1. Place a niche in the wall
2. Install the 230 V, 50 H power cord
3. Install the flush valve connection cable
4. Set external control input (for versions with external control)

1 – Input U = 230V/50 Hz
2 – Possibility of outer control
3 – Valve output 12V/50 Hz