The SA-ET 70 is a disinfection station with limited access to and exit from the protected zone of the device, with a brush system, sensors and a through ramp.
By entering the protected zone, the user cannot pass without disinfecting shoes and hands. Upon entering the shoe wash zone, a sensor activates 2 horizontal rotating brushes and nozzles with detergent mixed with water. The duration of the brushes being active can be modified from 1 second to more than 10. Passing through this zone disinfects footwear.
Then the user comes to hand disinfection. The integrated system responds to the simultaneous insertion of both hands into the interior area of the equipment where they are automatically sprayed with an aerosol. If the person has followed the correct procedure, the green light comes on, the ramp is raised and the person can pass. Otherwise, the red light illuminates and if the person does not repeat the defined procedure, the ramp remains lowered and passage is disabled.
To leave the protected zone, a button to return from the zone is installed, and hand disinfection is not required. By leaving the disinfection station, the brushes stop automatically. To clean the device, the brushes can be disassembled individually, without any tools. The disinfection station is designed for floor mounting. The water drain is above floor level. Disinfectant canister is not included in the delivery, can be ordered additionally.
Features:
- Horizontal brushes length 700 mm
- Adjustable stainless steel legs
- Compartments for required disinfection of both hands
- STOP button in case of emergency
- Stainless steel industrial case
- IP 65 class product
- Non-slippery fixed steps
- Drain for dirty water
- Stainless steel rods in the through ramp
- PLC control system with Siemens logo
- Green and red LED signal lights
