The SA 11.1 is a subsurface shower unit intended for new buildings or for the reconstruction of social facilities. The SA shower unit is intended for use only in connection with AZP Brno coin coins (MAS 1, MAS 2 versions). The shower is equipped with a solenoid valve that opens the water inlet. The user controls the shower by pressing a button.
SA 11.1 – with bolt fastening system no screws or bolts are visible. The cover is made of 2 mm thick stainless steel. The cover can be “pressed” to the level of the paving even if the installation box is fixed to the wrong depth.
We recommend the use of shower heads SP 1, SP 2, SP 3, SP 4 or SP 5 in combination with shower unit SA 11.
SA 11 is made of AISI 304 stainless steel. For cleaning, we have recommended WÜRTH detergents – material preservation (No. 0893 121 K) and material cleaning (No. 893 121 1).
Package contents
- installation box
- output and input screw
- stainless steel cover
- piezo button
- solenoid valve
- ball valve
- SP 1 – shower head 9L / min
- SP 2 – vandal-proof shower head 7L / min
- SP 3 – vandal-proof shower head 7L / min
- SP 4 – vandal-proof shower head 7L / min
- SP 5 – vandal-proof shower head 12L / min
| Water inlet | G 1/2“ |
| Water output to the shower head | G 1/2“ |
| Water pressure | 1 – 10 Bar (0,1 – 1,0 MPa) |
| Power supply: | automat MAS 1 or MAS 2 |
| Power requirement | 5 VA |
| Weight | 1,5 kg |
Requirements:
- Install a niche – diameter 150 x 75 mm for the installation box.
- Install the water supply (see diagram).
- Install the MAS connection cable.
- Other settings for overall configuration – see MAS 1 or MAS 2 coin-operated steering product data sheet
- A – water inlet G ½“ – n
- C – power supply MAS – n
- G – water outlet to shower head G ½“ –
