Electric heater 1,2-3kW , type M
Nickel-plated heating element, 6/4 "thread, thermostatic plastic head, 1x230 V, longer non-heating end for combined tanks, electric plug, adjustable thermostat and two-pole safety temperature limiter, 3m single-phase three-core power cable, nickel-plated heating element for radiator heating and sanitary water.
Electric heater 2 kW, type B
Electric heater 2-12 kW, type A
Electro-resistant heating element, nickel-plated, without thermostatic head, intended for heating static and flowing water or antifreeze in storage tanks or DHW tanks. No cable.
3 x 230 V/400 V
Electric heater 2-12kW, type C
Electro-resistant heating element, without thermostatic head, intended for heating static and flowing water or antifreeze in storage tanks with immersed DHW tank. Not intended for direct DHW heating! No cable.
Electric heater 2-3 kW type N
Nickel-plated heating element, thread 6/4", thermostatic plastic head, 1 x 230 V for connection to solar pumping stations, switch and two-pole safety temperature limiter, 5m single-phase three-wire power cable with connector, nickel-plated heating element intended for heating radiator and sanitary water.
Electric heater 2-3kW , type D
Electro-resistant heating element, nickel-plated, thermostatic head, contactor, intended for heating static and flowing water or antifreeze in storage tanks, and DHW tanks. Power supply via fixed wiring, 5-core cable for connection to the fuse board, inputs for remote control via Ripple control signal and via main controller.
Electric heater 3 kW, type B
Electric heater 3-4,5kW , type F ( for photovoltaic systems)
Heater with thermostatic head, adjusting operating thermostat 0-90 ° C. Enables wiring from single-phase, continuous output modulation using a wattrouter.
Electric heater 4,5 kW, type B
Electric heater 6 kW , type B
Electric heater 6 kW 6/4″ ETT-C
