Pellet furnance 2,5-5,53 kW Centrometal Z6 – gray
Pellet furnance 2,5-5,53 kW Centrometal Z6 – red
Pellet furnance 2,5-5,53 kW Centrometal Z6 – white
Pellet furnance 2,64-9,05 kW Centrometal Z12 – red
Hot air stove on wood pellets intended for heating the room with air with the help of a built-in fan. Steel construction, modern design and high efficiency.
The CentroPelet Z12 comes with a remote control. It is delivered with a digital regulation through which the operation of the furnace can be controlled.
Easy to use, maintain and install (no need for radiators / pipes).
Pellet furnance 2,64-9,05 kW Centrometal Z12 – white
Hot air stove on wood pellets intended for heating the room with air with the help of a built-in fan. Steel construction, modern design and high efficiency.
The CentroPelet Z12 comes with a remote control. It is delivered with a digital regulation through which the operation of the furnace can be controlled.
Easy to use, maintain and install (no need for radiators / pipes).
Pellet stove CentroPelet Z15
Pellete furnance 2,64-9,05 kW Centrometal Z12 – gray
Hot air stove on wood pellets intended for heating the room with air with the help of a built-in fan. Steel construction, modern design and high efficiency.
The CentroPelet Z12 comes with a remote control. It is delivered with a digital regulation through which the operation of the furnace can be controlled.
Easy to use, maintain and install (no need for radiators / pipes).
Pipe for floor heating 16×2 – WAVIN
Pipe thermostat AVANSA TH2
The thermostat for the AVANSA TH2 circulation pump is used to switch the ignition on or off, most often the electrical contact (pump phase). Turns the circulation on and off. Therefore, the pump is easily regulated, for example, by the boiler circuit of a solid fuel boiler, or by filling a tank or a hot water boiler. The thermostat can be easily placed on the pipe and connected to the other side so that it does not loosen. There is a bimetal in the thermostat that activates the on or off contact.
