Waterproof coating for ceramics and stone SKERMO TERAZZE is an innovative product of the latest generation, solvent-free – with 100% active material, specially developed for waterproofing balconies and terraces exposed to water penetration. After application, this product stops water infiltration by penetrating deep into the substrate and thus ensures exceptional durability for at least 10 years.
Characteristics
SKERMO TERRAZZE does not change the breathability and color of treated surfaces – with its waterproofing effect, it prevents the formation of efflorescence, musk, mold, lichen bacteria, etc., which represent a serious problem for balconies, terraces and for the health of buildings. Protects treated surfaces from aging and degradation due to freeze-thaw cycles. Its special formulation stops the penetration of chlorides and is therefore strongly recommended for areas close to the sea. Surfaces treated with SKERMO TERRAZZE coating have better protection against dust, soot and pollution in general.
Field of use
SKERMO TERRAZZE waterproof coating provides long-term protection against water penetration on balcony (terrace) floors covered with ceramic tiles, terracotta tiles, concrete, etc.
Surface preparation and application
Thoroughly clean all surfaces to remove dirt, dust and loose or decaying parts or any other foreign matter. Remove dirt and stains on the tiles with a neutral detergent. Apply SKERMO TERRAZZE with a roller or brush to the entire tiled surface, making sure to properly “saturate” the grout area. After 15 minutes, remove the excess with a clean cloth. Protect from walking and water in any form for a minimum of 18 hours after application.
Warnings
Before applying the product in full measure, perform a test on a small, less visible area of the surface to check the color stability of the product. Apply the product in conditions that allow the fastest penetration of the product into the surface – between +5 °C and +35 °C or 41 °F and 95 °F (in the environment and the substrate). Therefore, do not apply on frozen surfaces or during storms (current or upcoming) and do not apply the product on surfaces exposed to direct sunlight.
Consumption
Over tiled surfaces – 15 m²/L
Packaging
Bottle 1L, bucket 5L .
Storage
Store for 18 months in undamaged, unopened packaging in the shade at a temperature between +5 °C and +35 °C or 41 °F and 95 °F. Not frost-proof.
Technical characteristics
Product appearance | colorless to straw yellow liquid |
Applied product color | transparent |
Volatile organic compounds | 0 g/L |
Water vapor transmission rate | 0.71 WVT / 1.74 Perm |