This Hygiene Barrier with its two horizontally mounted and mutually rotating brushes provides a deep cleaning and sanitation for Shoe / Boot or Slipper soles with. Hygiene, which is a must for protection within the workshop, is maintained at a high level. It is designed to provide a high degree of safety by the mandatory passing of personnel through all hygienic controls included mandatory hands disinfection program ensures the best cleaning of the shoe soles as well as disinfection for hands. What does the EDT-TY-100 do? This Hygiene Barrier with its two horizontally mounted and mutually rotating brushes provides a deep cleaning and sanitation for Shoe / Boot or Slipper soles with. Hygiene, which is a must for protection within the workshop, is maintained at a high level. It is designed to provide a high degree of safety by the mandatory passing of personnel through all hygienic controls included mandatory hands disinfection program ensures the best cleaning of the shoe soles as well as disinfection for hands. Working Method and Properties To prevent the bristles from breaking off, the brushes are about 8cm above the rotating cylinders which are installed in depth. Thanks to the Integrated Dosing Pump, the solution consisting of a mixture of Water and Chemical cleaning agent is sprayed on the brushes during the operation. You can also adjust the density of the cleaning agent through the dozing valves. The working time of the brushes can be adjusted manually from the program, for 01 to 10 seconds or longer. Special Sensors at the starting points start the operation. This model has about 100cm long brushes. Rotating brushes are automatically activated by the sensors. The next step is hand disinfection and the last step is free passage through the turnstile. Thanks to the turnstile system and the fully automatic speedy process, the staff enter the workshop serially, without waiting in line. The brushes on the system are long-lasting and resistant to breakage / spillage. Hand Disinfection Our hygiene barrier machine is also equipped with a hand disinfectant turnstile system. Besides shoe sole cleaning, you can disinfect your hands. Thus, disinfecting hands becomes an imperative and uncontrolled passage of persons who have not properly disinfected is not allowed systematically. Thanks to the hand disinfection unit, disinfectant is applied automatically at the determined dosage, so that only people whose hands are properly cleaned can be entered into sensitive production areas. Turnstile turns freely at the exit from the Workshop to the Social Area direction and can be closed as desired. In “Power Cuts” and “Emergency” situations, the turnstile will allow free passage in both directions. Product Benefits

• Working time of the brushes that clean the shoes / boots soles can be adjusted as desired.
• Brushes can be easily removed and installed without the need for an additional tool.
• With the special brushing system that penetrates deep into the soles, the shoes’ sole are cleaned in a guaranteed way.
• Thanks to its deeply mounted brush bristles, it offers a long service life.
• A mandatory hand disinfection is provided simultaneously, the system does not operate with one hand, so it provides absolute disinfectant.
• Hand disinfection time can be adjusted.
• The system, which does not allow manual intervention from the outside, guarantees a safe disinfection.
• In case of emergencies such as “Power Cuts” and “Emergency” by activation of EMERGENCY STOP button, the turnstile provides free passage in both directions.
• There is a turnstile lock that can be adjusted for free exit according to the preference; the turnstile released time also can be adjusted.
• Our product has a quality and hygienic surface structure thanks to its Stainless Steel special Satin surface.

In this hygiene barrier, which is produced entirely of high quality stainless steel, foot sole cleaning, hand washing and hand disinfection are offered together. There are knee-sensor sink, liquid soap dispenser, and paper towel holder with dustbin parts. There is also a curly dry hygiene mat beneath the sink.  Thus, in alternative option you can also wash your hands and use the Jet dryer feature and then perform the disinfection process while standing on the secured and non-slippery brush system for sole cleaning purpose. In this hygiene barrier, which is produced entirely of high quality stainless steel, foot sole cleaning, hand washing and hand disinfection are offered together. There are knee-sensor sink, liquid soap dispenser, and paper towel holder with dustbin parts. There is also a curly dry hygiene mat beneath the sink.  Thus, in alternative option you can also wash your hands and use the Jet dryer feature and then perform the disinfection process while standing on the secured and non-slippery brush system for sole cleaning purpose. What does the SA-EFE hygiene barrier do? It is a system that solves the hygiene needs of the personnel collectively in a single machine at the entrances and exits of the workshops and facilities. This hygiene station is designed specifically for plants in the food and beverages processing and industry and large-scale facilities that work in multiple shifts simultaneously. It is an extremely long-lasting and wear-resistant product that provides effective sanitation and hygiene protection to populated facilities with mandatory hygiene steps offered together. Working Method and Properties SA-EFE hygiene barrier is a brushed type hygiene barrier that has mandatory hand wash and hand disinfection system. The sink is with knee sensor, the water starts to flow automatically when the person comes to the sink, and there is no need to contact the sink. Immediately after washing the hands, the hands are dried instantly with the Jet dryer / Paper Towel next to the sink. The system is completely touch-less, therefore there is no need of physical hands contact with the devices at any point. During the transition to disinfectant hygiene turnstile, foot sole washing brushes start to work. Shoes’ bottoms are washed by spraying a hygienic chemical and water mixture underneath. Disinfectant is sprayed when hands are inserted into the disinfectant compartments in the hygiene barrier. Disinfectant is not sprayed and the turnstile is not opened without putting both hands into the device. Furthermore the disinfection device does not work if the personnel skipped the hands wash step. Thus, there will be complete hands wash and disinfection. After all these processes are completed, turnstile is opened and the transition to the manufacturing section is allowed. This hygienic barrier, which can be used together with our other hygiene equipment on demand, provides absolute sanitation and saves you time.   Hand Disinfection Thanks to the hand disinfection device, disinfectant is applied automatically at the determined dosage, so that only people whose hands are properly cleaned can be entered into sensitive production areas. Thanks to the sensors, chemicals are not used in vain and there is no waste of time. After mandatory step of washing your hands with soap, you are required to mandatory disinfect your hands in the disinfection compartments. The turnstile is released only after all the mandatory hygiene steps are completed.   Product Benefits

• Washing and disinfecting the hands as well as washing the soles of the shoes takes place in one combined system.
• Provides quick and efficient sanitation at the facility, and saves time at the entrance to the workshops.
• It operates with sensor control, therefore hand washing, drying and disinfection processes are carried out without any contact by hands.
• Hands Dry step are presented in 2 different ways as paper towel and trash bin or Jet Hand dryer as an option.
• Brushes penetrating deep into shoe soles are at a minimum level of contraction and thorough cleaning is provided.
• A mandatory hand disinfection is provided simultaneously, and the spray time of the hand disinfectant can be programmed optionally.
• The turnstile lock that can be adjusted for the free exit according to preference.
• Turnstile released permit duration can be adjusted.
• Our product has a quality and hygienic surface structure thanks to satin stainless steel. Infection and contamination risk is minimized.
• Adjustable chemical dosage is possible. It offers washing, drying and disinfection processes together via sensors without any need for physical contact with the hands, eliminating the risk of contamination.

It is a very useful practical machine thanks to its easy installation and portability. In addition to being a tourniquet, it offers disinfection for both hands. Portable hygiene barrier can be easily used in places where it is needed. It is a very useful practical machine thanks to its easy installation and portability. In addition to being a tourniquet, it offers disinfection for both hands. Portable hygiene barrier can be easily used in places where it is needed. What is Portative for? Tanriver Portable Hygiene Barrier is designed especially for use in narrow spaces, escape and emergency roads. It can be used as a practical solution where traditional turnstiles do not allow passage in emergency situations. It also provides mandatory two-handed disinfection and helps to maintain hygienic environment with a curly dry hygienic mat for cleaning the sole of shoes. Working Method and Properties Only 220Volt electricity is needed to operate the device, if this requirement is met this hygiene barrier can be moved to any area you want or need and start to use it very easily. Sole of shoes are cleaned only with a dry curly hygienic mat. For hand disinfection, both hands should be inserted into the 2 separate compartments that are located in front of the machine at the same time; the solution is sprayed as soon as the hands are detected by the sensors. There are Red / Green LED warning lamps showing that the process is done and completed or not. After the hands disinfection process of the person was completed, only then turnstile will be unlocked and allow the passage. Product Benefits

• cleaning the sole of the shoes via the dry hygiene mat and the disinfection of the hands take place together.
• Curly Dry Hygiene Mat that can be easily changed.
• Provides hygiene quickly and efficiently in any location needed within the facility. It can be easily transported and installed anywhere.
• Mandatory step for disinfection of both hands simultaneously, and the dose of the hand disinfectant can be determined (it does not function with one hand only and all spray parameters can be adjusted.)
• It does not allow the passage if the disınfection process was not completed.
• There is a turnstile lock that can be adjusted for free exit according to the preference; the turnstile released time also can be adjusted.
• Machine Dimensions are 960mm (L) x 960mm (W) x 1508 mm (H).
• There is an emergency stop button for emergency escapes.
• Ergonomic special Stainless Ball Joint Feet are available.
• On one side of the device, there is a stainless carrier plate for disinfectant container.
• Height adjustable via Stainless Steel Round Joint legs.

This device allows you to keep hand hygiene under control when passing to different areas in the workshop and between floors. Turnstile does not allow passage without being disinfected in the machine. Our product is completely made of stainless material. Hands are inserted into 2 separate compartments on the front of the machine at the same time, the disinfectant process starts as soon as the hands are detected by the photocells. There are Red / Green led warning lights on the hand disinfectant. When the hand disinfectant process is completed, the green warning lamp lights up, and thereafter Turnstile allow the free passage. If the hand disinfection process is not done correctly, the turnstile will never allow passage. Both hands must be sensed and disinfected at the same time by the sensor for correct operation. On the right / left side of the device there is a stainless carrier plate for the disinfectant canister. Our device can be integrated with various card reading systems and automatic guillotine doors. The device is presented to be mounted on the ground and delivered ready for operation. This device allows you to keep hand hygiene under control when passing to different areas in the workshop and between floors. Turnstile does not allow passage without being disinfected in the machine. Our product is completely made of stainless material. Hands are inserted into 2 separate compartments on the front of the machine at the same time, the disinfectant process starts as soon as the hands are detected by the photocells. There are Red / Green led warning lights on the hand disinfectant. When the hand disinfectant process is completed, the green warning lamp lights up, and thereafter Turnstile allow the free passage. If the hand disinfection process is not done correctly, the turnstile will never allow passage. Both hands must be sensed and disinfected at the same time by the sensor for correct operation. On the right / left side of the device there is a stainless carrier plate for the disinfectant canister. Our device can be integrated with various card reading systems and automatic guillotine doors. The device is presented to be mounted on the ground and delivered ready for operation.