This Hygiene Barrier with its two horizontally mounted and mutually rotating brushes provides a deep cleaning and sanitation for Shoe / Boot or Slipper soles with. Hygiene, which is a must for protection within the workshop, is maintained at a high level. It is designed to provide a high degree of safety by the mandatory passing of personnel through all hygienic controls included mandatory hands disinfection program ensures the best cleaning of the shoe soles as well as disinfection for hands What does the EKO- EDT-TY-100 do? This Hygiene Barrier with its two horizontally mounted and mutually rotating brushes provides a deep cleaning and sanitation for Shoe / Boot or Slipper soles with. Hygiene, which is a must for protection within the workshop, is maintained at a high level. It is designed to provide a high degree of safety by the mandatory passing of personnel through all hygienic controls included mandatory hands disinfection program ensures the best cleaning of the shoe soles as well as disinfection for hands.  Working Method and Properties To prevent the bristles from breaking off, the brushes are about 8cm above the rotating cylinders which are installed in depth. Thanks to the Integrated Dosing Pump, the solution consisting of a mixture of Water and Chemical cleaning agent is sprayed on the brushes during the operation. You can also adjust the density of the cleaning agent through the dozing valves. The working time of the brushes can be adjusted manually from the program, for 01 to 10 seconds or longer. Special Sensors at the starting points start the operation. This model has about 100cm long brushes. Rotating brushes are automatically activated by the sensors. The next step is hand disinfection and the last step is free passage through the turnstile. Thanks to the turnstile system and the fully automatic speedy process, the staff enter the workshop serially, without waiting in line. The brushes on the system are long-lasting and resistant to breakage / spillage. Hand Disinfection Our hygiene barrier machine is also equipped with a hand disinfectant turnstile system. Besides shoe sole cleaning, you can disinfect your hands. Thus, disinfecting hands becomes an imperative and uncontrolled passage of persons who have not properly disinfected is not allowed systematically. Thanks to the hand disinfection unit, disinfectant is applied automatically at the determined dosage, so that only people whose hands are properly cleaned can be entered into sensitive production areas. Turnstile turns freely at the exit from the Workshop to the Social Area direction and can be closed as desired. In “Power Cuts” and “Emergency” situations, the turnstile will allow free passage in both directions. Product Benefits

• Working time of the brushes that clean the shoes / boots soles can be adjusted as desired.
• Brushes can be easily removed and installed without the need for an additional tool.
• With the special brushing system that penetrates deep into the soles, the shoes’ sole are cleaned in a guaranteed way.
• Thanks to its deeply mounted brush bristles, it offers a long service life.
• A mandatory hand disinfection is provided simultaneously, the system does not operate with one hand, so it provides absolute disinfectant.
• Hand disinfection time can be adjusted.
• The system, which does not allow manual intervention from the outside, guarantees a safe disinfection.
• In case of emergencies such as “Power Cuts” and “Emergency” by activation of EMERGENCY STOP button, the turnstile provides free passage in both directions.
• There is a turnstile lock that can be adjusted for free exit according to the preference; the turnstile released time also can be adjusted.
• Our product has a quality and hygienic surface structure thanks to its Stainless Steel special Satin surface.

In our hygienic tourniquet, which is produced entirely of 304 quality stainless steel, mop with chemical solution and foot sole cleaning, hand washing and hand disinfection are offered together. In our hygienic tourniquet, which is produced entirely of 304 quality stainless steel, mop with chemical solution and foot sole cleaning, hand washing and hand disinfection are offered together. What Does Pet Hygiene Barrier Do? It provides the opportunity to clean shoes, boots, and slipper’s soles over a hygienic mat with solution to provide a hygienic entrance to the workshops and production facilities. Thanks to the turnstile system, only people who have completed the sterilization steps are allowed to pass. It is a hygienic tourniquet system that enables the hygiene of all personnel by placing it in the entrance and exit points of the workshop and in the transition areas of crowded locations. Working Method and Properties There is a mop with a solution to clean the soles of our hygiene turnstiles. The pool solution is filled and drained automatically in the foot pool part of this mat. It does not need to be filled or unloaded manually by the operator, providing a more hygienic environment. Although the solution is prepared automatically with water and chemical mixture, the dosage can be determined optionally. The person who is provided with shoe hygiene should complete the hand disinfection step afterwards. The machine has a hand disinfectant turnstile system. Thanks to this system, it is not allowed to pass through the turnstile until the disinfection process of the hands is completed and entrance to the workshop cannot be made.   Hand Disinfection Thanks to the hand disinfection unit, disinfectant is applied automatically at the determined dosage, so that only people whose hands are properly cleaned can be entered into sensitive production areas. Thanks to the sensors, chemicals are not used in vain or time is wasted. Thanks to the two-hand mandatory disinfection zone, it is a must to disinfect both hands at the same time and maximum hygiene is provided. Turnstile turns freely in the direction of the Social Area from the Workshop and can be closed according to preference. In “Power Cuts” and “EMERGENCY” turnstiles provide free passage in both directions. Product Benefits

• Cleaning the soles of the shoes and disinfecting the hands take place together.
• Provides quick and efficient sanitation at the facility.
• Shoes’ sole cleaning is provided in the hygiene pool with 2cm depth that includes curly hygiene mat.
• Hygienic solution of the pool is filled and discharged automatically, thus saving labor and time, and maintaining contactless hygiene conditions.
• Mandatory step for disinfection of both hands simultaneously, and the dose of the hand disinfectant can be determined (it does not function with one hand only and all spray parameters can be adjusted.)
• There is a turnstile lock that can be adjusted for free exit according to the preference; the turnstile released time also can be adjusted.
• Our product has a quality and hygienic surface structure thanks to the refined stainless steel.
• Infection and contamination risk is minimized.
• Machine Dimensions are 1300 mm (L) x 920 mm (W) x 1650mm (H).
• 42.4mm diameter stainless steel pipe is included to discharge the waste water.
• There is an Emergency stop button for emergency escapes.
• There are ergonomic special Stainless ball Joint Feet that can be adjusted in height.
• Height adjustable via Stainless Steel Round Joint legs.

This device allows you to keep hand hygiene under control when passing to different areas in the workshop and between floors. Turnstile does not allow passage without being disinfected in the machine. Our product is completely made of stainless material. Hands are inserted into 2 separate compartments on the front of the machine at the same time, the disinfectant process starts as soon as the hands are detected by the photocells. There are Red / Green led warning lights on the hand disinfectant. When the hand disinfectant process is completed, the green warning lamp lights up, and thereafter Turnstile allow the free passage. If the hand disinfection process is not done correctly, the turnstile will never allow passage. This device allows you to keep hand hygiene under control when passing to different areas in the workshop and between floors. Turnstile does not allow passage without being disinfected in the machine. Our product is completely made of stainless material. Hands are inserted into 2 separate compartments on the front of the machine at the same time, the disinfectant process starts as soon as the hands are detected by the photocells. There are Red / Green led warning lights on the hand disinfectant. When the hand disinfectant process is completed, the green warning lamp lights up, and thereafter Turnstile allow the free passage. If the hand disinfection process is not done correctly, the turnstile will never allow passage. Both hands must be sensed and disinfected at the same time by the sensor for correct operation. On the right / left side of the device there is a stainless carrier plate for the disinfectant canister. Our device can be integrated with various card reading systems and automatic guillotine doors. The device is presented to be mounted on the ground and delivered ready for operation.