This Hygiene Barrier with its two horizontally mounted and mutually rotating brushes provides a deep cleaning and sanitation for Shoe / Boot or Slipper soles with. Hygiene, which is a must for protection within the workshop, is maintained at a high level. It is designed to provide a high degree of safety by the mandatory passing of personnel through all hygienic controls included mandatory hands disinfection program ensures the best cleaning of the shoe soles as well as disinfection for hands. What does the EDT-TY-100 do? This Hygiene Barrier with its two horizontally mounted and mutually rotating brushes provides a deep cleaning and sanitation for Shoe / Boot or Slipper soles with. Hygiene, which is a must for protection within the workshop, is maintained at a high level. It is designed to provide a high degree of safety by the mandatory passing of personnel through all hygienic controls included mandatory hands disinfection program ensures the best cleaning of the shoe soles as well as disinfection for hands. Working Method and Properties To prevent the bristles from breaking off, the brushes are about 8cm above the rotating cylinders which are installed in depth. Thanks to the Integrated Dosing Pump, the solution consisting of a mixture of Water and Chemical cleaning agent is sprayed on the brushes during the operation. You can also adjust the density of the cleaning agent through the dozing valves. The working time of the brushes can be adjusted manually from the program, for 01 to 10 seconds or longer. Special Sensors at the starting points start the operation. This model has about 100cm long brushes. Rotating brushes are automatically activated by the sensors. The next step is hand disinfection and the last step is free passage through the turnstile. Thanks to the turnstile system and the fully automatic speedy process, the staff enter the workshop serially, without waiting in line. The brushes on the system are long-lasting and resistant to breakage / spillage. Hand Disinfection Our hygiene barrier machine is also equipped with a hand disinfectant turnstile system. Besides shoe sole cleaning, you can disinfect your hands. Thus, disinfecting hands becomes an imperative and uncontrolled passage of persons who have not properly disinfected is not allowed systematically. Thanks to the hand disinfection unit, disinfectant is applied automatically at the determined dosage, so that only people whose hands are properly cleaned can be entered into sensitive production areas. Turnstile turns freely at the exit from the Workshop to the Social Area direction and can be closed as desired. In “Power Cuts” and “Emergency” situations, the turnstile will allow free passage in both directions. Product Benefits

• Working time of the brushes that clean the shoes / boots soles can be adjusted as desired.
• Brushes can be easily removed and installed without the need for an additional tool.
• With the special brushing system that penetrates deep into the soles, the shoes’ sole are cleaned in a guaranteed way.
• Thanks to its deeply mounted brush bristles, it offers a long service life.
• A mandatory hand disinfection is provided simultaneously, the system does not operate with one hand, so it provides absolute disinfectant.
• Hand disinfection time can be adjusted.
• The system, which does not allow manual intervention from the outside, guarantees a safe disinfection.
• In case of emergencies such as “Power Cuts” and “Emergency” by activation of EMERGENCY STOP button, the turnstile provides free passage in both directions.
• There is a turnstile lock that can be adjusted for free exit according to the preference; the turnstile released time also can be adjusted.
• Our product has a quality and hygienic surface structure thanks to its Stainless Steel special Satin surface.

In this hygiene barrier, which is produced entirely of high quality stainless steel, foot sole cleaning, hand washing and hand disinfection are offered together. There are knee-sensor sink, liquid soap dispenser, and paper towel holder with dustbin parts. There is also a curly dry hygiene mat beneath the sink.  Thus, in alternative option you can also wash your hands and use the Jet dryer feature and then perform the disinfection process while standing on the secured and non-slippery brush system for sole cleaning purpose. In this hygiene barrier, which is produced entirely of high quality stainless steel, foot sole cleaning, hand washing and hand disinfection are offered together. There are knee-sensor sink, liquid soap dispenser, and paper towel holder with dustbin parts. There is also a curly dry hygiene mat beneath the sink.  Thus, in alternative option you can also wash your hands and use the Jet dryer feature and then perform the disinfection process while standing on the secured and non-slippery brush system for sole cleaning purpose. What does the FEPSET hygiene barrier do? It is a system that solves the hygiene needs of the personnel collectively in a single machine at the entrances and exits of the workshops and facilities. This hygiene station is designed specifically for plants in the food and beverages processing and industry and large-scale facilities that work in multiple shifts simultaneously. It is an extremely long-lasting and wear-resistant product that provides effective sanitation and hygiene protection to populated facilities with mandatory hygiene steps offered together. Working Method and Properties FEPSET hygiene barrier is a brushed type hygiene barrier that has mandatory hand wash and hand disinfection system. The sink is with knee sensor, the water starts to flow automatically when the person comes to the sink, and there is no need to contact the sink. Immediately after washing the hands, the hands are dried instantly with the Jet dryer / Paper Towel next to the sink. The system is completely touch-less, therefore there is no need of physical hands contact with the devices at any point. During the transition to disinfectant hygiene turnstile, foot sole washing brushes start to work. Shoes’ bottoms are washed by spraying a hygienic chemical and water mixture underneath. Disinfectant is sprayed when hands are inserted into the disinfectant compartments in the hygiene barrier. Disinfectant is not sprayed and the turnstile is not opened without putting both hands into the device. Furthermore the disinfection device does not work if the personnel skipped the hands wash step. Thus, there will be complete hands wash and disinfection. After all these processes are completed, turnstile is opened and the transition to the manufacturing section is allowed. This hygienic barrier, which can be used together with our other hygiene equipment on demand, provides absolute sanitation and saves you time. Hand Disinfection Thanks to the hand disinfection device, disinfectant is applied automatically at the determined dosage, so that only people whose hands are properly cleaned can be entered into sensitive production areas. Thanks to the sensors, chemicals are not used in vain and there is no waste of time. After mandatory step of washing your hands with soap, you are required to mandatory disinfect your hands in the disinfection compartments. The turnstile is released only after all the mandatory hygiene steps are completed.   Product Benefits

• Washing and disinfecting the hands as well as washing the soles of the shoes takes place in one combined system.
• Provides quick and efficient sanitation at the facility, and saves time at the entrance to the workshops.
• It operates with sensor control, therefore hand washing, drying and disinfection processes are carried out without any contact by hands.
• Hands Dry step are presented in 2 different ways as paper towel and trash bin or Jet Hand dryer as an option.
• Brushes penetrating deep into shoe soles are at a minimum level of contraction and thorough cleaning is provided.
• A mandatory hand disinfection is provided simultaneously, and the spray time of the hand disinfectant can be programmed optionally.
• The turnstile lock that can be adjusted for the free exit according to preference.
• Turnstile released permit duration can be adjusted.
• Our product has a quality and hygienic surface structure thanks to satin stainless steel. Infection and contamination risk is minimized.
• Adjustable chemical dosage is possible. It offers washing, drying and disinfection processes together via sensors without any need for physical contact with the hands, eliminating the risk of contamination.

Dimensions: 2150mm (length) x 1050mm (width) x 1700mm (height)  

The SA ETG-70 boot and boot washing machine cleans both the soles and sides of shoes. Ensuring continuous access for personnel in accordance with hygiene standards, the system is an automatic, two-way hygiene barrier designed for thorough cleaning of the sides and soles of boots. The device, with two horizontally mounted, counter-rotating brushes and three vertically mounted brushes, ensures quick and hygienic access for personnel to the workshop or facility. The horizontal brushes can be easily removed and installed for daily cleaning and maintenance without requiring any additional tools. What is the Function of the SA-ETG-70 Hygiene Barrier with Hand Sanitizer, Sole, and Boot Wash? It ensures a hygienic entrance to the facility by cleaning the soles and sides of boots, and disinfecting hands. This machine allows your staff to proceed quickly and efficiently throughout the cleaning process. While the sides and soles of boots are thoroughly cleaned, it also provides the opportunity for hand disinfection. Based on a one-time walk-through cleaning principle, our machine provides fast and comprehensive sterilization with the option to clean the soles and sides of boots. This machine has the advantage of being placed in frequently used areas within the facility, such as at the entrances and exits of the workshop, to ensure the cleaning of shoes, making sanitation mandatory. Operating Principle and Features It operates with two horizontally mounted brushes and three vertically mounted brushes. The system is fully automatic and activated by sensors and valves. This process also prepares and releases the cleaning agent and water mixture. Boot sides and soles are cleaned in the following steps: Rotating side brushes move simultaneously to clean the sides of the boots, and horizontally rotating brushes move horizontally to clean the soles. A mixture of water and detergent is sprayed. The user moves forward to complete the cleaning of the soles and sides of the boots. The next step is hand disinfection, and the final step is the turnstile's ability to provide free passage. Hand Disinfection Our hygiene barrier machine is also equipped with a turnstile system with hand disinfectant. In addition to boot cleaning, you can also disinfect your hands. This makes hand disinfection a necessity, and those who have not properly disinfected are systematically denied entry. The hand disinfection unit automatically applies the specified dose of disinfectant, ensuring that only those with properly cleaned hands are allowed into sensitive production areas. The turnstile rotates freely at the exit from the production hall to the social area and can be closed if desired. In cases of "power outages" and "emergencies," the turnstile will allow free passage in both directions. Product Key Benefits The operating times of the brushes that clean the soles of the feet and the sides of the boots can be easily adjusted. The brushes can be easily removed and reattached without the need for any additional tools, making cleaning easy, fast, and extremely practical. The deeply mounted bristles ensure a long service life. Mandatory hand disinfection is simultaneously achieved, and since the system is not one-handed, it delivers complete disinfectant. The exit direction can be either open or locked, depending on your preference. Our product boasts a high-quality and hygienic surface thanks to its special satinized stainless steel surface. The risk of infection and contamination is minimized. Adjustable chemical dosing is available. A bypass entrance is available for those entering wearing shoes or slippers. It can be integrated with card, finger, and face recognition systems. It can be integrated with automatic doors.  

This Hygiene Barrier provides a fast and hygienic entrance to the workshop thanks to 3 brushes mounted vertically and 2 horizontally mounted brushes which are rotating mutually. Thanks to the integrated dosing pump, all brushes are sprayed with a mixture of water and detergent during operation. The working time of the brushes can be manually adjusted to 01-10 seconds. The operation is started and stopped with the sensors at the start and end points This Hygiene Barrier provides a fast and hygienic entrance to the workshop thanks to 3 brushes mounted vertically and 2 horizontally mounted brushes which are rotating mutually. Thanks to the integrated dosing pump, all brushes are sprayed with a mixture of water and detergent during operation. The working time of the brushes can be manually adjusted to 01-10 seconds. The operation is started and stopped with the sensors at the start and end points.