This Hygiene Barrier with its two horizontally mounted and mutually rotating brushes provides a deep cleaning and sanitation for Shoe / Boot or Slipper soles with. Hygiene, which is a must for protection within the workshop, is maintained at a high level. It is designed to provide a high degree of safety by the mandatory passing of personnel through all hygienic controls included mandatory hands disinfection program ensures the best cleaning of the shoe soles as well as disinfection for hands What does the EKO- EDT-TY-100 do? This Hygiene Barrier with its two horizontally mounted and mutually rotating brushes provides a deep cleaning and sanitation for Shoe / Boot or Slipper soles with. Hygiene, which is a must for protection within the workshop, is maintained at a high level. It is designed to provide a high degree of safety by the mandatory passing of personnel through all hygienic controls included mandatory hands disinfection program ensures the best cleaning of the shoe soles as well as disinfection for hands.  Working Method and Properties To prevent the bristles from breaking off, the brushes are about 8cm above the rotating cylinders which are installed in depth. Thanks to the Integrated Dosing Pump, the solution consisting of a mixture of Water and Chemical cleaning agent is sprayed on the brushes during the operation. You can also adjust the density of the cleaning agent through the dozing valves. The working time of the brushes can be adjusted manually from the program, for 01 to 10 seconds or longer. Special Sensors at the starting points start the operation. This model has about 100cm long brushes. Rotating brushes are automatically activated by the sensors. The next step is hand disinfection and the last step is free passage through the turnstile. Thanks to the turnstile system and the fully automatic speedy process, the staff enter the workshop serially, without waiting in line. The brushes on the system are long-lasting and resistant to breakage / spillage. Hand Disinfection Our hygiene barrier machine is also equipped with a hand disinfectant turnstile system. Besides shoe sole cleaning, you can disinfect your hands. Thus, disinfecting hands becomes an imperative and uncontrolled passage of persons who have not properly disinfected is not allowed systematically. Thanks to the hand disinfection unit, disinfectant is applied automatically at the determined dosage, so that only people whose hands are properly cleaned can be entered into sensitive production areas. Turnstile turns freely at the exit from the Workshop to the Social Area direction and can be closed as desired. In “Power Cuts” and “Emergency” situations, the turnstile will allow free passage in both directions. Product Benefits

• Working time of the brushes that clean the shoes / boots soles can be adjusted as desired.
• Brushes can be easily removed and installed without the need for an additional tool.
• With the special brushing system that penetrates deep into the soles, the shoes’ sole are cleaned in a guaranteed way.
• Thanks to its deeply mounted brush bristles, it offers a long service life.
• A mandatory hand disinfection is provided simultaneously, the system does not operate with one hand, so it provides absolute disinfectant.
• Hand disinfection time can be adjusted.
• The system, which does not allow manual intervention from the outside, guarantees a safe disinfection.
• In case of emergencies such as “Power Cuts” and “Emergency” by activation of EMERGENCY STOP button, the turnstile provides free passage in both directions.
• There is a turnstile lock that can be adjusted for free exit according to the preference; the turnstile released time also can be adjusted.
• Our product has a quality and hygienic surface structure thanks to its Stainless Steel special Satin surface.

Hygiene Line Knee sensor sink, paper towel holder and dustbin, liquid soap dispenser, special tourniquet with hand disinfectant, curly hygiene mat, chemical dosing. Complete 304 quality stainless Double hand mandatory disinfectant compartments Approximate dimensions: 2100mm (length) x 1100mm (width) x 1750mm (height). Protective steel bars Electrical panel Emergency stop button PLC control system Mandatory hand wash SA EPE Sink ,Hand Disinfectant Turnstile ,and Hygiene pool with Mat  Hygiene Line Knee sensor sink, paper towel holder and dustbin, liquid soap dispenser, special tourniquet with hand disinfectant, curly hygiene mat, chemical dosing. Complete 304 quality stainless Double hand mandatory disinfectant compartments Approximate dimensions: 2100mm (length) x 1100mm (width) x 1750mm (height). Protective steel bars Electrical panel Emergency stop button PLC control system Mandatory hand wash  Technical specifications

• Approximate Dimensions: 2100mm (length) x 1100mm (width) x 1750mm (height)
• 01 knee-level hand wash sink with sensor
• 1.5mm and 4.0mm hair thickness
• 4 point disinfectant spray
• Emergency stop button • Hygienic mat for foot pool
• Adjustable stainless feet
• Two-hand mandatory disinfectant compartments
• Photocell liquid soap dispenser
• Strong chassis, isolated welded, industrial design
• Automatic solution and water dosing inside the pool
• IP 65 protection class
• Complete 304 quality stainless steel material.
• Optional falling arm turnstile
• Automatic dirty water discharge system
• Stainless steel 3 twist turnstile arm, special design.
• Stainless steel bars (balustrade)
• PLC control system with Siemens logo
• One hundred percent hygiene obligation with trigger system
• Green and red led signal lights
• Z paper towel holder dustbin combination
• Timed spraying

This device allows you to keep hand hygiene under control when passing to different areas in the workshop and between floors. Turnstile does not allow passage without being disinfected in the machine. Our product is completely made of stainless material. Hands are inserted into 2 separate compartments on the front of the machine at the same time, the disinfectant process starts as soon as the hands are detected by the photocells. There are Red / Green led warning lights on the hand disinfectant. When the hand disinfectant process is completed, the green warning lamp lights up, and thereafter Turnstile allow the free passage. If the hand disinfection process is not done correctly, the turnstile will never allow passage. This device allows you to keep hand hygiene under control when passing to different areas in the workshop and between floors. Turnstile does not allow passage without being disinfected in the machine. Our product is completely made of stainless material. Hands are inserted into 2 separate compartments on the front of the machine at the same time, the disinfectant process starts as soon as the hands are detected by the photocells. There are Red / Green led warning lights on the hand disinfectant. When the hand disinfectant process is completed, the green warning lamp lights up, and thereafter Turnstile allow the free passage. If the hand disinfection process is not done correctly, the turnstile will never allow passage. Both hands must be sensed and disinfected at the same time by the sensor for correct operation. On the right / left side of the device there is a stainless carrier plate for the disinfectant canister. Our device can be integrated with various card reading systems and automatic guillotine doors. The device is presented to be mounted on the ground and delivered ready for operation.