- Distance from intake to exhaust: 180 mm
- Power el. motor: 93/67/46 W
- Discharge (m): 6
- Dimensions h x w x d (cm): 19.5×14.5×13.5
- Weight (kg): 3
- Suction DN (mm): 32
- DN exhaust (mm): 32
- Maximum flow (L / min): 55
- Connector dimensions: 2
Circulation pump for central heating 32/6/180 Avansa
The Avansa 32/60 180 mm circulation pump is intended for central heating systems. The pump housing is made of cast iron, cast aluminum. The high-quality bipolar motor, asynchronous, does not require overload protection, has three speeds, which is controlled by a special switch mounted on the terminal block, which allows the pump to be set to the characteristics of the device.
Description
Additional information
| Weight | 3 kg |
|---|
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
Circulation pump for central heating 32/8/180 Avansa
The Avansa 32/80 180 mm circulation pump is intended for central heating systems. The pump housing is made of cast iron, cast aluminum. The high-quality bipolar motor, asynchronous, does not require overload protection, has three speeds, which is controlled by a special switch mounted on the terminal block, which allows the pump to be set to the characteristics of the device.
Circulation pump for central heating 25/6/130 Avansa
The Avansa 25/60 130mm circulation pump is intended for central heating systems. The pump housing is made of cast iron, cast aluminum. The high-quality bipolar motor, asynchronous, does not require overload protection, has three speeds, which is controlled by a special switch mounted on the terminal block, which allows the pump to be set to the characteristics of the device.
Pipe thermostat AVANSA TH2
The thermostat for the AVANSA TH2 circulation pump is used to switch the ignition on or off, most often the electrical contact (pump phase). Turns the circulation on and off. Therefore, the pump is easily regulated, for example, by the boiler circuit of a solid fuel boiler, or by filling a tank or a hot water boiler. The thermostat can be easily placed on the pipe and connected to the other side so that it does not loosen. There is a bimetal in the thermostat that activates the on or off contact.
Reviews
There are no reviews yet.