Controls | Heating/ Cooling |
Voltage | thermostat: 3 V (2 AA alkaline batteries) receiver: 230 V 50 Hz |
Receiver power | 1 W |
Receiver output | no voltage SPDT relay |
Max load | 5 A 230 V 50 Hz |
Reach | up to 30 m |
Measured temp. range | -10 °C…+50 °C |
Temp. regulation range | +5 °C…+45 °C |
Regulation temp. accuracy | 0,2 °C |
Reading temp accuracy | 0,1 °C |
Hysteresis for temp. control | 0,5 °C/1 °C /2 °C/4 °C |
Showing status | thermostat: LCD / receiver: LED diodes |
Working temp. range | +5 °C…+45 °C |
Storage temp. range | 0 °C…+65 °C |
IP class | IP 20, class II protection from electricity |
Colour | white |
Montage | thermostat: wall receiver: 230 V 50 Hz net socket |
Weight | thermostat: 167 g (without batteries) receiver: 288 g |
Certificates | Ina accordance with R&TTE |
Warranty | 2 years |
Dimensions (W/H/D) mm | termostat: 138/86/29 prijamnik: 64/112/68 |
Package content | Euroster 2026TX thermostat with socket, RX receiver, wall sockets, manuals, batteries |
View basket “Cirkulation pump for central heating 25/4/180 Avansa” has been added to your basket.
Room thermostat EUROSTER 2026TXRX
The controller is equipped with an innovative heating curve optimization module for comfort and energy savings.
Universal, applicable for handling CH boiler and electrical devices. Recommended for underfloor heating control. The new model has been enhanced with a number of new, useful features: intuitive weekly programming with a precision of 10 minutes, 4 temperature levels, a runtime counter.
Category: Room thermostats
Tag: Atria
Description
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
Circulation pump for central heating 32/8/180 Avansa
The Avansa 32/80 180 mm circulation pump is intended for central heating systems. The pump housing is made of cast iron, cast aluminum. The high-quality bipolar motor, asynchronous, does not require overload protection, has three speeds, which is controlled by a special switch mounted on the terminal block, which allows the pump to be set to the characteristics of the device.
Pump regulation EUROSTER 11C
Room thermostat Avansa TH1
Thermostat installation:
Unplug the thermostat during installation.
Reliable operation largely depends on the installation location.
The thermostat must be placed in a place away from heat sources (radiator, TV, refrigerator) and away from direct sunlight at least 1.5 m.
Installation near the door is not recommended due to air flow.
The connection cables are located inside the thermostat
To get to the connectors, you need to select the adjustment button and remove the screws that secure the cover.
The connection is possible according to the enclosed diagram in the package.
Wi-fi thermostat TD therm HEAT
TD Heat is an IoT product that allows you to quickly automate a gas boiler, boiler or heating system, regardless of manufacturer and model.
The technology inside the TD Heat allows you to connect to the internet so you can control your heating devices from anywhere using a mobile phone or computer connected to the internet.
Device for preventing low return water temperature to the boiler
92,89 €
Room thermostat AVANSA 2003
- Measured temperature range: 5–35 ° C (in 0.1 ° C increments)
- Set temperature range: 10–30 ° C (in 0.5 ° C increments)
- Measurement temperature accuracy: ± 0.5 ° C
- Set temperature range: 7-35 ° C (0.5 ° C each)
- Activation sensitivity: ± 0.2 / ± 0.3 ° C
- Constant standby temperature: + 7 ° C
- Recommended storage temperature: -10 ° C… + 60 ° C
- Supply voltage: 2x1.5 V batteries (LR6 type)
- Power: 1.5 mW
- Battery life: approx. 1 term
- Dimensions: 112 x 75 x 45 mm
- Weight: 154 g
- Heat sensor: 154 g
- Protection: IP 30
Boiler regulation Avansa 110 R
Circulation pump for central heating 25/6/130 Avansa
The Avansa 25/60 130mm circulation pump is intended for central heating systems. The pump housing is made of cast iron, cast aluminum. The high-quality bipolar motor, asynchronous, does not require overload protection, has three speeds, which is controlled by a special switch mounted on the terminal block, which allows the pump to be set to the characteristics of the device.
Reviews
There are no reviews yet.