| Weight | 0,2 kg |
|---|
Room thermostat AVANSA 2003
- Measured temperature range: 5–35 ° C (in 0.1 ° C increments)
- Set temperature range: 10–30 ° C (in 0.5 ° C increments)
- Measurement temperature accuracy: ± 0.5 ° C
- Set temperature range: 7-35 ° C (0.5 ° C each)
- Activation sensitivity: ± 0.2 / ± 0.3 ° C
- Constant standby temperature: + 7 ° C
- Recommended storage temperature: -10 ° C… + 60 ° C
- Supply voltage: 2×1.5 V batteries (LR6 type)
- Power: 1.5 mW
- Battery life: approx. 1 term
- Dimensions: 112 x 75 x 45 mm
- Weight: 154 g
- Heat sensor: 154 g
- Protection: IP 30
Additional information
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
Room thermostat Avansa TH1
Thermostat installation:
Unplug the thermostat during installation.
Reliable operation largely depends on the installation location.
The thermostat must be placed in a place away from heat sources (radiator, TV, refrigerator) and away from direct sunlight at least 1.5 m.
Installation near the door is not recommended due to air flow.
The connection cables are located inside the thermostat
To get to the connectors, you need to select the adjustment button and remove the screws that secure the cover.
The connection is possible according to the enclosed diagram in the package.
Circulation pump for central heating 25/4/130 Avansa
The Avansa 25/40 130mm circulation pump is intended for central heating systems. The pump housing is made of cast iron, cast aluminum. The high-quality bipolar motor, asynchronous, does not require overload protection, has three speeds, which is controlled by a special switch mounted on the terminal block, which allows the pump to be set to the characteristics of the device.
Circulation pump for central heating 25/6/130 Avansa
The Avansa 25/60 130mm circulation pump is intended for central heating systems. The pump housing is made of cast iron, cast aluminum. The high-quality bipolar motor, asynchronous, does not require overload protection, has three speeds, which is controlled by a special switch mounted on the terminal block, which allows the pump to be set to the characteristics of the device.
Reviews
There are no reviews yet.