Showing all 11 results

Show sidebar
-10%
Close

Circulation pump for central heating 32/6/180 E Avansa

1.147,50 kn 1.032,75 kn
  • Distance from intake to exhaust: 180 mm
  • Discharge (m): 6
  • Weight (kg): 2.8
  • Suction DN (mm): 32
  • DN exhaust (mm): 32
  • Connector dimensions: 2 "
-10%
Close

Cirkulation pump for central heating 15/6/130 Avansa

387,50 kn 348,75 kn
The AQUART Avansa 15/60 130 mm circulation pump is intended for central heating systems. The pump housing is made of cast iron, cast aluminum. The high-quality bipolar motor, asynchronous, does not require overload protection, has three speeds, which is controlled by a special switch mounted on the terminal block.
Close

Cirkulation pump for central heating 25/4/130 Avansa

The Avansa 25/40 130mm circulation pump is intended for central heating systems. The pump housing is made of cast iron, cast aluminum. The high-quality bipolar motor, asynchronous, does not require overload protection, has three speeds, which is controlled by a special switch mounted on the terminal block, which allows the pump to be set to the characteristics of the device.
-10%
Close

Cirkulation pump for central heating 25/4/180 Avansa

368,75 kn 331,88 kn
The Avansa 25/40 180 mm circulation pump is intended for central heating systems. The pump housing is made of cast iron, cast aluminum. The high-quality bipolar motor, asynchronous, does not require overload protection, has three speeds, which is controlled by a special switch mounted on the terminal block, which allows the pump to be set to the characteristics of the device.
-10%
Close

Cirkulation pump for central heating 25/4/180 E Avansa

1.012,50 kn 911,25 kn
  • Distance from intake to exhaust: 180 mm
  • Power el. motor: 35 W
  • Discharge (m): 4
  • Weight (kg): 2.5
  • Suction DN (mm): 25
  • DN exhaust (mm): 25
  • Maximum flow (l / min): 48
  • Connector dimensions: 1
-10%
Close

Cirkulation pump for central heating 25/6/130 Avansa

385,00 kn 346,50 kn
The Avansa 25/60 130mm circulation pump is intended for central heating systems. The pump housing is made of cast iron, cast aluminum. The high-quality bipolar motor, asynchronous, does not require overload protection, has three speeds, which is controlled by a special switch mounted on the terminal block, which allows the pump to be set to the characteristics of the device.
-10%
Close

Cirkulation pump for central heating 25/6/180 Avansa

385,00 kn 346,50 kn
Udaljenost od usisnog do ispušnog grla: 180 mm Snaga el. motora: 93/67/46 W Ipust (m): 6 Dimenzije v x š x
-10%
Close

Cirkulation pump for central heating 25/6/180 E Avansa

1.112,50 kn 1.001,25 kn
  • Distance from intake to exhaust: 180 mm
  • Power el. motor: 45 W
  • Discharge (m): 6
  • Weight (kg): 2.7
  • Suction DN (mm): 25
  • DN exhaust (mm): 25
  • Maximum flow (l / min): 58
  • Connector dimensions: DN40 6/4 "
-10%
Close

Cirkulation pump for central heating 25/8/180 Avansa

756,25 kn 680,63 kn
The AVANSA 25/80 180mm circulation pump is intended for central heating systems. The pump housing is made of cast iron, cast aluminum. The high-quality bipolar motor, asynchronous, does not require overload protection, has three speeds, which is controlled by a special switch mounted on the terminal block, which allows the pump to be set to the characteristics of the device.
-10%
Close

Cirkulation pump for central heating 32/6/180 Avansa

425,00 kn 382,50 kn
The Avansa 32/60 180 mm circulation pump is intended for central heating systems. The pump housing is made of cast iron, cast aluminum. The high-quality bipolar motor, asynchronous, does not require overload protection, has three speeds, which is controlled by a special switch mounted on the terminal block, which allows the pump to be set to the characteristics of the device.
-10%
Close

Cirkulation pump for central heating 32/8/180 Avansa

812,50 kn 731,25 kn
The Avansa 32/80 180 mm circulation pump is intended for central heating systems. The pump housing is made of cast iron, cast aluminum. The high-quality bipolar motor, asynchronous, does not require overload protection, has three speeds, which is controlled by a special switch mounted on the terminal block, which allows the pump to be set to the characteristics of the device.