Showing 1–24 of 43 results

Boiler regulation Avansa 110 E

thermostat for pumps and boiler rooms

Boiler regulation Avansa 110 R

thermostat for pumps and boiler rooms AVANSA 110-R is a dual-function thermostat - designed for independent control of two pumps.

Boiler regulation AVANSA 110 S

thermostat for solar collector pumps

Boiler regulation Avansa 110 Z

thermostat for pumps and boilers

Circulation pump for central heating 15/6/130 Avansa

The AQUART Avansa 15/60 130 mm circulation pump is intended for central heating systems. The pump housing is made of cast iron, cast aluminum. The high-quality bipolar motor, asynchronous, does not require overload protection, has three speeds, which is controlled by a special switch mounted on the terminal block.

Circulation pump for central heating 25/4/130 Avansa

The Avansa 25/40 130mm circulation pump is intended for central heating systems. The pump housing is made of cast iron, cast aluminum. The high-quality bipolar motor, asynchronous, does not require overload protection, has three speeds, which is controlled by a special switch mounted on the terminal block, which allows the pump to be set to the characteristics of the device.

Circulation pump for central heating 25/6/130 Avansa

The Avansa 25/60 130mm circulation pump is intended for central heating systems. The pump housing is made of cast iron, cast aluminum. The high-quality bipolar motor, asynchronous, does not require overload protection, has three speeds, which is controlled by a special switch mounted on the terminal block, which allows the pump to be set to the characteristics of the device.

Circulation pump for central heating 25/6/180 Avansa

Distance from intake to exhaust: 180 mm Electric motor power: 46/67/93 W Discharge (m): 6 Dimensions h x w x

Circulation pump for central heating 25/8/180 Avansa

The AVANSA 25/80 180mm circulation pump is intended for central heating systems. The pump housing is made of cast iron, cast aluminum. The high-quality bipolar motor, asynchronous, does not require overload protection, has three speeds, which is controlled by a special switch mounted on the terminal block, which allows the pump to be set to the characteristics of the device.

Circulation pump for central heating 32/4/180 Avansa

46,59 
The Avansa 32/40 180 mm circulation pump is intended for central heating systems. The pump housing is made of cast iron, cast aluminum. The high-quality bipolar motor, asynchronous, does not require overload protection, has three speeds, which is controlled by a special switch mounted on the terminal block, which allows the pump to be set to the characteristics of the device.

Circulation pump for central heating 32/6/180 Avansa

The Avansa 32/60 180 mm circulation pump is intended for central heating systems. The pump housing is made of cast iron, cast aluminum. The high-quality bipolar motor, asynchronous, does not require overload protection, has three speeds, which is controlled by a special switch mounted on the terminal block, which allows the pump to be set to the characteristics of the device.

Circulation pump for central heating 32/8/180 Avansa

The Avansa 32/80 180 mm circulation pump is intended for central heating systems. The pump housing is made of cast iron, cast aluminum. The high-quality bipolar motor, asynchronous, does not require overload protection, has three speeds, which is controlled by a special switch mounted on the terminal block, which allows the pump to be set to the characteristics of the device.

Cirkulation pump for central heating 25/4/180 Avansa

44,05 
The Avansa 25/40 180 mm circulation pump is intended for central heating systems. The pump housing is made of cast iron, cast aluminum. The high-quality bipolar motor, asynchronous, does not require overload protection, has three speeds, which is controlled by a special switch mounted on the terminal block, which allows the pump to be set to the characteristics of the device.

Dirt trap 1″ Caleffi DIRTMAG

Dirt trap with magnet. Technopolymer body. Connections F. Adjustable for horizontal and vertical pipes. Drain tap with hose connection. Pmax operating: 3 bar. Tmin-Tmax: 0–90 ° C.

Dirt trap 3/4″ Caleffi DIRTMAG

Dirt trap with magnet. Technopolymer body. Connections F. Adjustable for horizontal and vertical pipes. Drain tap with hose connection. Pmax operating: 3 bar. Tmin-Tmax: 0–90 ° C.

Gas detector + solenoid valve AVANSA 100M

Installing a gas detector can prevent poisoning, suffocation, fire or explosion. The detector can detect gas accumulation before the gas concentration becomes life-threatening. Detection is local both visual and audible. A solenoid solenoid valve is a special safety device used to shut off the main gas supply in an emergency. It can be connected to a leak monitoring system (gas detector) to automatically shut off the gas supply.

Gas detector AVANSA 100M

Installing a gas detector can prevent poisoning, suffocation, fire or explosion. The detector can detect gas accumulation before the gas concentration becomes life-threatening. Detection is local and visual and audible. If the detector is connected to a gas solenoid valve, it can be turned off in the event of a gas leak.

Gas detector AVANSA 150MC

Accumulation of gas indoors (shops, offices, apartments, warehouses, garages) can lead to serious consequences. By installing a carbon monoxide detector, you can prevent poisoning or suffocation. Carbon monoxide (CO) poisoning is caused by inhalation of this toxic gas. Since the gas has no odor, does not irritate and has no color, poisoning occurs without sensation. If the victim is asleep, they do not feel any signs, and death is numerous in such situations. The detector can detect accumulated carbon monoxide even before it threatens your life.

Heat pump regulator Avansa 110 C

thermostat for pumps and boiler rooms

Heating regulation EUROSTER UNI2 – 2 circles of heating

UNI2 is a multi-purpose controller designed to control a heating system equipped with two heating circuits with mixing valves (eg radiator supply and underfloor heating).

Pipe thermostat AVANSA TH2

The thermostat for the AVANSA TH2 circulation pump is used to switch the ignition on or off, most often the electrical contact (pump phase). Turns the circulation on and off. Therefore, the pump is easily regulated, for example, by the boiler circuit of a solid fuel boiler, or by filling a tank or a hot water boiler. The thermostat can be easily placed on the pipe and connected to the other side so that it does not loosen. There is a bimetal in the thermostat that activates the on or off contact.

Programmed room thermostat AVANSA 2007

  • Input voltage: 24V AC / DC, ........ 250 V AC; 50 Hz
  • Intensity: 8A
  • Measured temperature range: 0.35 ° C (0.1 ° C each)
  • Set temperature range: 7-35 ° C (0.5 ° C each)
  • Measurement temperature accuracy: ± 0.5 ° C
  • Activation sensitivity (radiator heating): ± 0.2 ° C
  • Activation sensitivity (underfloor heating): + 0 / -0.2 ° C
  • Recommended storage temperature: -10 ° C ..... + 60 ° C
  • Supply voltage: 2 x 1.5V batteries (type LR6; AA)
  • Power: 1.3 mW
  • Dimensions: 130 x 80 x 35 mm (without bracket)
  • Weight: 154 g
  • Thermal sensor: NTC 10 KΩ ± 1% at 25 ° C
  • Protection: IP 30

Pump regulation EUROSTER 11C

Central heating system pump control The electronic control of the central heating pump automatically switches the pump on / off, depending on the ratio of the current temperature and the set temperature. The anti-stop function of the controller prevents the empty pump impeller from stopping.